Our Helideck Landing Nets at Seacon Solutions are manufactured in Singapore to the highest standards to ensure utmost safety and durability. Designed specifically to be utilised in high-risk landing zones where it is essential to prevent helicopters from skidding whilst landing.

Our Helideck Landing Nets are packaged to allow for easy handling and transportation via land, ship or helicopter. Our team will work closely with our clients to ensure that the distribution process is streamlined and therefore eliminating any potential delay time.

Locations where our Helideck Landing Nets can be utilised to reduce the risk exponentially:
Roof top Helipads
Ships
Leisure Yachts
Offshore oil rigs

Our experienced team of specialists manufacture the nets by hand to the suit every different clients’ specifications using a low-profile knotless design. Seacon Solutions only uses the finest materials for manufacturing the nets in order to withstand the most severe offshore weather conditions and ultra violet radiation.

All helicopter landing nets produced by Seacon Solutions go through a strict quality control process to ensure that every weave is correct before it is packaged for transport.

• Manufactured to CAP 437 standard
• Low profile design
• High quality materials
• Does not obstruct helideck markings
• Made in Singapore

There are three standard sizes of netting as listed in the table below. The minimum size depends upon the size / type of helicopter for which the landing area is to be used.

 

Small	9 metres by 9 metres
Medium	12 metres by 12 metres
Large	15 metres by 15 metres

 

TECHNICAL SPECIFICATIONS

Specifications of Standard Helideck Net.

• Net Size*in Meters = 9 x 9 , 12  x 12 or 15 x 15
• Ropes used best quality Sisal/Manila Ropes
• Rope Size : 20mm dia.
• Mesh Size should not be more than 200 mm.
• Knitted type
• This is in compliance with offshore helicopter landing areas guidance CAP 437 (30 September 2002).